Builder Tip #36 from HomebuiltHELP 
Is your Hand an Accurate Torque Wrench?

As builders we install quite a few nuts and bolts and then usually tighten them simply by "feel". How accurate is this method? Can you train your hand to feel the correct torque by practicing?

This Tip of the Week explores a challenge you can impose upon your builder friends to evaluate their ability to achieve proper torque when confronted with a tightening exercise. Learn how close (or not!) you are to achieving the proper torque for an AN3 and AN4 bolt!
Above: Can your hand measure these values?
Above: Device for measuring and confirming your best guess torque
Brand New DVD title from HomebuiltHELP!

How we Built our Belite UltraCub
HomebuiltHelp has just released a new DVD series on the Belite Ultralight kit: the UltraCub. The first title in the series demonstrates building the aluminum cabin used in both the UltraCub and the ProCub models. 

This marks the first ultralight kit we have put to film in our library of how-to builds. Ultralights, in general, provide a unique freedom to build and fly under US FAA regulations. They require no registration after construction is complete and also require no pilots license to fly! It is an inexpensive and hassle free way to get flying!

Belite has engineered a sophisticated set of ultralights in kit form that make building an affordable airplane possible. We have added to that formula by making the building process fast and easy by providing an affordable how-to video.

Purchase this first in the series DVD to learn how easy it is build an aircraft and get flying - safe and affordable!  This might be something you've been waiting for!
Above: Belite aluminum Cabin
Belite Aircraft website click Here
Don't forget that past Tip of the Week articles and videos are listed on the Archive Listing page on our website.  You can check back there for future reference and review of these tips.You can also reach that page from a link on the top, right side of our home page.
HomebuiltHELP | PO Box 111 Brussels WI 54204 | email: support@HomebuiltHELP.com
HomebuiltHelp is hosting a fly in just in time for AirVenture. Stop by and visit the studio and hangar on your way to Oshkosh (about 75 miles north in beautiful Door County). Land on 2,000 foot private grass strip at Crispy Cedars 7W18. Refreshments, snacks, shuttle and rustic camping. Street address is 9442 Lovers Lane, Brussels, Wisconsin
HomebuiltHELP | PO Box 111, Brussels, WI 54204
Unsubscribe jon@joncroke.com
Update Profile | About our service provider
Sent by support@homebuilthelp.com in collaboration with
Trusted Email from Constant Contact - Try it FREE today.
Try it free today