| Get 
		your 601XL aircraft finished and in the air - now even faster!  
		Many common construction tasks are explained and demonstrated.
 Designed for the builder that 
		wants to make best use of their 
		time in completing the popular quick-build version of the 601XL aircraft 
		kit.
 (A fantastic aid to builders of the standard kit 
		version, too!)
 
 The 601XL quick-build 
		aircraft
		was designed to provide maximum pre-assembly 
		of kit parts to save the builder time.  This video adds to 
		that goal by showing construction procedures for components necessary to 
		complete the aircraft. The amount of time saved by "learning through 
		watching" is substantial and will pay for the price of the video many 
		times over.
 This presentation does not cover 
		the complete assembly of the aircraft, but does provide an almost step 
		by step explanation/demonstration for the following components: 
			
			Nose wheel fabrication and installationMain landing gear installation
 Wheels, tires and axles assembly
 Wing locker fabrication (option for the 601)
 Installation of the landing light into wing
 Attachment of rudder onto fuselage
 In addition, other 
		topics are discussed -  including strobe wiring inside the wing, 
		fuel sender installation, cabin step installation, flap motor 
		preparation, and more. 
		Save MONEY – fewer 
		errors in assembly means less parts are ruined. Everyone makes mistakes when 
		building… drilling in the wrong places.. parts cut or trimmed in the 
		wrong way…  performing tasks that are out of sequence and having to take 
		things apart and do them over….. parts get ruined or compromised…This video will save more than its price by preventing the 
		accidental destruction of expensive kit components by allowing you to 
		watch the building before attempting it yourself.
 
		Build a BETTER LOOKING 
		plane – by watching!Many of the cosmetic 
		deficiencies in our pride and joy are the result of building errors. It 
		is not hard to imagine that obtaining a near perfect job is close to impossible 
		when we attempt a procedure for the very first time.  By watching some 
		one else make the bend, drill the hole, cut the part – we have a much 
		better chance of doing it right.  The result is a better looking, safer aircraft.  Learn from others’ mistakes 
		and experience!
 
		Make your building 
		experience more ENJOYABLE – Your investment in time is 
		actually more important than the dollar value for the kit.  Building a 
		plane takes a long time and much of this time can be daunting 
		- always wondering if  it is being done 'right'. Having to buy new 
		components or starting over on an assembly that was performed in error 
		is not a pleasant experience.  By eliminating the 
		guesswork, your time is more 
		enjoyable as you eliminate many ‘unknowns’ by watching someone 
		else who has done it before.
 
		Make use of the 
		experience of those that have prior experience building this plane! Note: This production is not 
		associated or endorsed by Zenith Aircraft. It does not replace or 
		supersede the documentation provided with the kit.  It is meant to 
		be an aid in building the aircraft and its methods are presented only as 
		a suggestion to builders. This affordable double DVD video is approximately 
		1.5 hours in length .  The $38 price includes handling 
		and first class 
		postage. (International orders welcome, air mail 
		postage included!)  
			
				| 
					
						
							$38.00  Includes 
							First class shipping 
							 You can use your credit card by 
							pressing the ADD to CART button below (uses secure encrypted connection)  OR you can send a check for 
							$38 to: HomebuiltHELPBox 111
 Brussels, WI 54204
 We ship same 
							day we receive your check! OR If 
							you want to pay by credit card but not online, then 
							email us at
							
							support@HomebuiltHelp.com with your phone number 
							and best time to call and we can complete the 
							transaction on the phone |  
		
 
			   
              
			Landing light layout                                   
			Light opening cutout demonstration   
		   Lamp frame assembly                                        
		Lamp wiring
 
		  
		   Control stick 
		pre-assembly                                  
		Fuel sender adjustment
 
		   Fly cutter used for tank opening                               
		Easy to build wing cradle
 | 
		 Nose tube bearing installation
 
 
		 Bungee & nose tube installation
 
 
		 Landing gear preparation
 
 
		 Brake caliper/axle install
 
 
		 Wheel bearing removal/grease packing
 
 
		 Wing locker cutout demonstration
 
 
 
  A locker opening is born!
 
 
		 Finishing touches
 
 
		 Dzus fastener installation
 
 
		 Lense installed
 
		 Wing wiring/plumbing suggestions
 
		 Rudder hinge installation
 
		 Installation of cabin step
 |